STM32L476G-EVAL
Rev.A-
Core
Cortex-M4
-
Debug interfaces
ST-Link
JTAG/SW
-
Device
STM32L476ZGTx -
CMSIS Pack
STM32L476G-EVAL_BSP
STM32L476G-EVAL Evaluation board
Overview
The STM32L476G-EVAL Evaluation board is designed as a complete demonstration and development platform for the STMicroelectronics Arm® Cortex®-M4 core-based STM32L476ZG microcontroller, with 1 Mbyte of flash memory and 128 Kbytes of SRAM.
The full range of hardware features available on the board helps users to enhance their application development by an evaluation of all the peripherals (such as USB, USART, digital microphones, ADC and DAC, dot-matrix TFT LCD, LCD glass module, IrDA (supported up to version MB1144 C-01 of the board), LDR, SRAM, NOR flash memory device, Quad-SPI flash memory device, microSD™ card, sigma-delta modulators, smartcard with SWP, CAN transceiver, EEPROM, RF-EEPROM).
The daughterboard and extension connectors provide an easy way to connect a daughterboard or wrapping board for the user's specific application.
ST-LINK/V2-1 is integrated into the board, as the embedded in-circuit debugger and programmer for the STM32 MCU and USB Virtual COM port bridge.
Getting started
ST-LINK driver installation and firmware upgrade (on Microsoft Windows)
- Download the latest ST-LINK driver.
- Extract the archive and run
dpinst_amd64.exe
. Follow the displayed instructions. - Download the latest ST-LINK firmware upgrade.
- Extract the archive and run the
ST-LinkUpgrade.exe
program. - Connect the board to your PC using a USB cable and wait until the USB enumeration is completed.
- In the ST-Link Upgrade program, press the Device Connect button.
- When the ST-LINK driver is correctly installed, the current ST-LINK version is displayed.
- Press the Yes >>>> button to start the firmware upgrade process.