STM32G071B-DISCO
Rev.C
-
Core
Cortex-M0+
-
Debug interface
ST-Link
-
Device
STM32G071RBTx -
CMSIS Pack
STM32G071B-DISCO_BSP
-
Examples_MIX: DMA_FLASHToRAM
µVision AC6How to use a DMA to transfer a word data buffer from Flash memory to embedded SRAM through the STM32G0xx DMA HAL and LL API. The LL API is used for performance improvement.
Download Pack -
FLASH_EraseProgram
Keil Studio, µVision AC6How to configure and use the FLASH HAL API to erase and program the internal Flash memory.
Download Pack -
GPIO_IOToggle
Keil Studio, µVision AC6How to configure and use GPIOs through the HAL API.
Download Pack -
IWDG_Reset
Keil Studio, µVision AC6How to handle the IWDG reload counter and simulate a software fault that generates an MCU IWDG reset after a preset laps of time.
Download Pack -
IWDG_WindowMode
Keil Studio, µVision AC6How to periodically update the IWDG reload counter and simulate a software fault that generates an MCU IWDG reset after a preset laps of time.
Download Pack -
PWR_LPRUN
Keil Studio, µVision AC6How to enter and exit the Low-power run mode.
Download Pack -
Platform
Keil Studio, µVision AC6CMSIS-RTOS2 Platform example with VIO
Download Pack -
RCC_SwitchClock
Keil Studio, µVision AC6Switch of the system clock (SYSCLK) from Low frequency clock to high frequency clock, using the RCC HAL API.
Download Pack -
WWDG_Example
Keil Studio, µVision AC6Configuration of the HAL API to periodically update the WWDG counter and simulate a software fault that generates an MCU WWDG reset when a predefined time period has elapsed.
Download Pack