Arm Keil MDK v6 Essential and Professional editions are now available to buy as monthly or annual subscriptions from our Developer Tools store. Visit the store to get access to the tools suite today!

  1. Boards
  2. STM32F429I-DISC1

STM32F429I-DISC1

Rev.C
STMicroelectronics
STM32F429I-DISC1

STM32F429I-DISC1 Discovery board

Overview

The STM32F429I-DISC1 Discovery kit is a complete demonstration and development platform for STMicroelectronics Arm® Cortex®-M4 core-based STM32F429ZIT6 microcontroller, with 2 Mbyte of flash memory and 256 Kbytes of SRAM.

The full range of hardware features available on the board helps users to enhance their application development by an evaluation of all the peripherals such as 2.4" QVGA TFT LCD, external 64-Mbit SDRAM, ST MEMS gyroscope, USB OTG Micro-AB connector, LEDs and push-buttons.

ST-LINK/V2-B is integrated into the board, as the embedded in-circuit debugger and programmer for the STM32 MCU and USB Virtual COM port bridge.

Getting started

ST-LINK driver installation and firmware upgrade (on Microsoft Windows)

  1. Download the latest ST-LINK driver.
  2. Extract the archive and run dpinst_amd64.exe. Follow the displayed instructions.
  3. Download the latest ST-LINK firmware upgrade.
  4. Extract the archive and run the ST-LinkUpgrade.exe program.
  5. Connect the board to your PC using a USB cable and wait until the USB enumeration is completed.
  6. In the ST-Link Upgrade program, press the Device Connect button.
  7. When the ST-LINK driver is correctly installed, the current ST-LINK version is displayed.
  8. Press the Yes >>>> button to start the firmware upgrade process.

Technical reference