Arm Keil MDK v6 Essential and Professional editions are now available to buy as monthly or annual subscriptions from our Developer Tools store. Visit the store to get access to the tools suite today!

  1. Boards
  2. STM32F407G-DISC1

STM32F407G-DISC1

Rev.C.1
STMicroelectronics
STM32F407G-DISC1

STM32F407G-DISC1 Discovery board

Overview

The STM32F407G-DISC1 Discovery kit is a complete demonstration and development platform for STMicroelectronics Arm® Cortex®-M4 core-based STM32F407VGT6 microcontroller, with 1 Mbyte of flash memory and 192 Kbytes of SRAM.

The full range of hardware features available on the board helps users to enhance their application development by an evaluation of all the peripherals such as one ST-MEMS digital accelerometer, one digital microphone, one audio DAC with integrated class D speaker driver, LEDs, push-buttons and a USB OTG Micro-AB connector. Specialized add-on boards can be connected by means of the extension header connectors.

ST-LINK/V2-A is integrated into the board, as the embedded in-circuit debugger and programmer for the STM32 MCU and USB Virtual COM port bridge.

Getting started

ST-LINK driver installation and firmware upgrade (on Microsoft Windows)

  1. Download the latest ST-LINK driver.
  2. Extract the archive and run dpinst_amd64.exe. Follow the displayed instructions.
  3. Download the latest ST-LINK firmware upgrade.
  4. Extract the archive and run the ST-LinkUpgrade.exe program.
  5. Connect the board to your PC using a USB cable and wait until the USB enumeration is completed.
  6. In the ST-Link Upgrade program, press the Device Connect button.
  7. When the ST-LINK driver is correctly installed, the current ST-LINK version is displayed.
  8. Press the Yes >>>> button to start the firmware upgrade process.

Technical reference