Arm Keil MDK v6 Essential and Professional editions are now available to buy as monthly or annual subscriptions from our Developer Tools store. Visit the store to get access to the tools suite today!

  1. Boards
  2. STM32F3DISCOVERY

STM32F3DISCOVERY

Rev.B
STMicroelectronics
STM32F3DISCOVERY

STM32F3DISCOVERY Discovery board

Overview

The STM32F3DISCOVERY Discovery kit is a complete demonstration and development platform for the STMicroelectronics Arm® Cortex®-M4 core-based STM32F303VCT6 microcontroller. It includes an ST-LINK/V2 (or V2-B) embedded debug tool interface, an ST MEMS gyroscope, an ST MEMS E-compass, LEDs, push-buttons, and a USB Mini-B connector.

ST-LINK/V2 is integrated into the board, as the embedded in-circuit debugger and programmer.

Getting started

ST-LINK driver installation and firmware upgrade (on Microsoft Windows)

  1. Download the latest ST-LINK driver.
  2. Extract the archive and run dpinst_amd64.exe. Follow the displayed instructions.
  3. Download the latest ST-LINK firmware upgrade.
  4. Extract the archive and run the ST-LinkUpgrade.exe program.
  5. Connect the board to your PC using a USB cable and wait until the USB enumeration is completed.
  6. In the ST-Link Upgrade program, press the Device Connect button.
  7. When the ST-LINK driver is correctly installed, the current ST-LINK version is displayed.
  8. Press the Yes >>>> button to start the firmware upgrade process.

Technical reference