The sai_edma_transfer example shows how to use sai driver with EDMA:In this example, one sai instance playbacks the audio data stored in flash/SRAM using EDMA channel.

The sai_interrupt example shows how to use sai fucntional API to implement interrupt playback:In this example, one sai instance playbacks the audio data stored in flash/SRAM using interrupt.

The sai_interrupt_record_playback example shows how to use sai driver with record and playback features: In this example, one sai instance record the audio data from input and playbacks the audio data.

The sai_interrupt_transfer example shows how to use sai driver with interrupt:In this example, one sai instance playbacks the audio data stored in flash/SRAM using interrupt.

The SCG example shows how to use SCG driver: 1. How to setup the SCG clock source. 2. How to use SCG clock while power mode switch. 3. How to use SCG APIs to get clock frequency.This example prints the clock frequency through the terminal using the SDK driver.

The Shell Demo application demonstrates to control Leds by commands.

The TPM project is a demonstration program of generating a combined PWM signal by the SDK TPM driver. It sets up the TPMhardware block to output PWM signals on two TPM channels. The example also show's the complementary mode of operationand deadtime insertion.On boards that have 2 LEDs connected to the TPM pins, the user will seea change in LED brightness if user enter different values.And if the board do not support LEDs to show, the outputs can be observed by oscilloscope.

The TPM project is a demonstration program of the SDK TPM driver's dual-edge capture feature.This feature is available only on certain SoC's.The example sets up a TPM channel-pair for dual-edge capture. Once the input signal is received,this example will print the capture values and period of the input signal on the terminal window.

The TPM project is a demonstration program of the SDK TPM driver's input capture feature.The example sets up a TPM channel for dual-edge capture. Once the input signal is received,this example will print the capture value.

The TPM project is a demonstration program of the SDK TPM driver's output compare feature.It sets up one TPM channel to toggle the output when a match occurs with the channel value. The usershould probe the TPM output with a oscilloscope to see the signal toggling.