This SCTIMer project is a demonstration program of the SDK SCTimer driver's PWM generation. It sets up a PWM signaland periodically updates the PWM signals dutycycle.

This SCTIMer project is a demonstration program of the SDK SCTimer driver's PWM generation. It sets up a PWM signaland periodically updates the PWM signals dutycycle.

The SCTimer project is a simple demonstration program of the SDK SCTimer's driver capabiltiy to generate PWM signals.

The SCTimer project is a simple demonstration program of the SDK SCTimer's driver capabiltiy to generate PWM signals.

The SDCARD FATFS project is a demonstration program that uses the SDK software. Tt mounts a file system based on a SD card then does "creat directory/read directory/create file/write file/read file"operation. The file sdhc_config.h has default SDHC configuration which can be adjusted to let carddriver has different performance. The purpose of this example is to show how to use SDCARD driver based FATFS disk in SDK software.

The SDCARD FATFS project is a demonstration program that uses the SDK software. Tt mounts a file system based on a SD card then does "creat directory/read directory/create file/write file/read file"operation. The...See more details in readme document.

The SDCARD FATFS project is a demonstration program that uses the SDK software. Tt mounts a file system based on a SD card then does "creat directory/read directory/create file/write file/read file"operation. The...See more details in readme document.

The SDCARD FATFS project is a demonstration program that uses the SDK software. Tt mounts a file system based on a SD card then does "creat directory/read directory/create file/write file/read file"operation. The file sdhc_config.h has default SDHC configuration which can be adjusted to let carddriver has different performance. The purpose of this example is to show how to use SDCARD driver based FATFS disk in SDK software.

The SDCARD FreeRTOS project is a demonstration program that uses the SDK software. It reads/writes/erases the SD card continusly. The purpose of this example is to show how to use SDCARD driver with FreeRTOS in SDK software to access SD card.Note: If DATA3 is used as the card detect PIN, please make sure DATA3 is pull down, no matter internal or external, at the same time, make sure the card can pull DATA3 up, then host can detect card through DATA3.And SDHC do not support detect card through CD by host, card can be detected through DATA3 or GPIO.No matter detect card through host or gpio, make sure the pinmux configuration is correct.

The SDCARD FreeRTOS project is a demonstration program that uses the SDK software. It reads/writes/erases the SD card continusly. The purpose of this example is to show how to use SDCARD driver with FreeRTOS in SDK software to access SD card.Note: If DATA3 is used as the card detect PIN, please make sure DATA3 is pull down, no matter internal or external, at the same time, make sure the card can pull DATA3 up, then host can detect card through DATA3.And SDHC do not support detect card through CD by host, card can be detected through DATA3 or GPIO.No matter detect card through host or gpio, make sure the pinmux configuration is correct.