The usbx_host_mass_storage example.

The usbx_host_mass_storage example.

The utick project is a simple demonstration program of the SDK utick driver. It sets up the utick hardware block to trigger a periodic interrupt after every 1 second. When the utick interrupt is triggered a message is printed on the UART terminal.

The utick project is a simple demonstration program of the SDK utick driver. It sets up the utick hardware block to trigger a periodic interrupt after every 1 second. When the utick interrupt is triggered a message is printed on the UART terminal.

The purpose of this demo is to show wakeup from deep sleep mode using MicroTick timer.The demo sets the MicroTick Timer as a wake up source and puts the device in deep-sleep mode. The MicroTick timer wakes up the device.

The purpose of this demo is to show wakeup from deep sleep mode using MicroTick timer.The demo sets the MicroTick Timer as a wake up source and puts the device in deep-sleep mode. The MicroTick timer wakes up the device.

In this example, the adc16 module is initialized and used to measure the VREF output voltage. So, it cannot use internal VREF as the reference voltage. Instead, it can use VDD_ANA or VREFH, for detailed information,...See more details in readme document.

In this example, the adc16 module is initialized and used to measure the VREF output voltage. So, it cannot use internal VREF as the reference voltage. Instead, it can use VDD_ANA or VREFH, for detailed information,...See more details in readme document.

The WDOG Example project is to demonstrate usage of the KSDK wdog driver.In this example,quick test is first implemented to test the wdog.And then after 5 times of refreshing the watchdog, a timeout reset is generated.

The WDOG Example project is to demonstrate usage of the KSDK wdog driver.In this example,quick test is first implemented to test the wdog.And then after 5 times of refreshing the watchdog, a timeout reset is generated.