The spi_interrupt_b2b_master example shows how to use spi functional API to do interrupt transfer as a master:In this example, the spi instance as master. Master sends a piece of data to slave, receive data from slave,and checkif the data master received is correct. This example needs to work with spi_interrupt_b2b_slave example.

The spi_interrupt_b2b_slave example shows how to use spi functional API to do interrupt transfer as a slave:In this example, the spi instance as slave. Slave receives data froma master and send a peiece of data to master,and check if the data slave received is correct. This example needs to work with spi_interrupt_b2b_master example.

The spi_interrupt_board2board_master example shows how to use spi driver as master to do board to board transfer withinterrupt:In this example, one spi instance as master and another spi instance on othereboard as slave. Master sends a piece ofdata to slave, and receive a piece of data from slave. This example checks if the data received from slave is correct.

The spi_interrupt_board2board_slave example shows how to use spi driver as slave to do board to board transfer with interrupt:In this example, one spi instance as slave and another spi instance on other board as master. Master sends a piece ofdata to slave, and receive a piece of data from slave. This example checks if the data received from master is correct.

The spi_polling_board2board_master example shows how to use spi driver as master to do board to board transfer with polling:In this example, one spi instance as master and another spi instance on othereboard as slave. Master sends a piece ofdata to slave, and receive a piece of data from slave. This example checks if the data received from slave is correct.

The spi_polling_board2board_slave example shows how to use spi driver as slave to do board to board transfer withpolling:Notice: The SPI slave of this example uses interrupt mode, as there is no polling mode for SPI slave.In this example, one spi instance as slave and another spi instance on other board as master. Master sends a piece ofdata to slave, and receive a piece of data from slave. This example checks if the data received from master is correct.

The SPIFI DMA Example project is a demonstration program that uses the KSDK software to program external serialflash using DMA and read through AHB bus.

The SPIFI Polling Example project is a demonstration program that uses the KSDK software to program external serialflash using polling and read through AHB bus.

The touch_cursor demo shows how to use LCD hardware cursor and position it using touch panel.In this example, a 32x32 cursor is shown. The cursor's position is changed in reaction to detected touch.

The usart_dma ring buffer example shows how to use usart driver with DMA:In this example, one usart instance connect to PC through usart, the board will send back all characters that PC send to the board.