The hexiwear_motion_click demo application provides a sanity demo for users to trigger a motion detection by.Then the sensor will detect it and the oled will draw a image on the oled screen. The purpose of this demo is to show how to detect the trigger from external sensor and draw a image on the oled screen, and to provide a simpleproject for debugging and further development.

The hexiwear_nfc_click demo application provides a sanity demo for users to use the nfc. The purpose of this demo is to show how to use the nfc (P2P mode, Read/Write mode, Card Emulation mode), and to provide a simple project for debugging and further development.

The hexiwear_oled_display demo shows how to display text and image on the oled with ssd graphic controller. In this demo we display a "Hello World" text and a "NXP" image on hexiwear screen.

The pressure demo application demonstrates the use of the MPL3115A2 sensor. Pressure data will be read from this sensor.

The hexiwear_relay_click demo application provides a sanity demo for users to trigger the relays. When the left button on the main board is pressed, the demo will trigger the relay. If the right button is pressed, the demo will trigger another relay, and the button-pressed information is received by the UART. The purpose of this demo is to show how to receive the click board information and to trigger the relay, and to provide a simple project for debugging and further development.

The hexiwear_spi_flash demo application shows how to store some data in the SPI Flash typed by the user in the Hyperterminal via the Serial OpenSDA interface, read those data in the SPI Flash and display them in the Hyperterminal.

The LED Blinky demo application provides a sanity check for the new SDK build environments and board bring up. The LED Blinky demo uses the systick interrupt to realize the function of timing delay. The example takes turns to shine the LED. The purpose of this demo is to provide a simple project for debugging and further development.