This example uses smartDMA to get image data from camera interface frame by frame captured by OV7670, and uses FlexIO LCD interface to display the captured image on st7796s low cost panel.

The System Performance Monitor (SYSPM) is a memory mapped peripheral that enables the user to monitor system and/or CPU events. This demo project obtains the event count value through the system performance monitor, and prints three values.

The System Performance Monitor (SYSPM) is a memory mapped peripheral that enables the user to monitor system and/or CPU events. This demo project obtains the event count value through the system performance monitor, and prints three values.

The TDET Example project is a demonstration program that uses the MCUX SDK software to show funcionality of Digital Tamper (TDET) module.

The TDET Example project is a demonstration program that uses the MCUX SDK software to show funcionality of Digital Tamper (TDET) module.

The utick project is a simple demonstration program of the SDK utick driver. It sets up the utick hardware block to trigger a periodic interrupt after every 1 second. When the utick interrupt is triggered a message is printed on the UART terminal.

The utick project is a simple demonstration program of the SDK utick driver. It sets up the utick hardware block to trigger a periodic interrupt after every 1 second. When the utick interrupt is triggered a message is printed on the UART terminal.

In this example, the adc16 module is initialized and used to measure the VREF output voltage. So, it cannot use internal VREF as the reference voltage. Instead, it can use VDD_ANA or VREFH, for detailed information,...See more details in readme document.

In this example, the adc16 module is initialized and used to measure the VREF output voltage. So, it cannot use internal VREF as the reference voltage. Instead, it can use VDD_ANA or VREFH, for detailed information,...See more details in readme document.

The WDOG Example project is to demonstrate usage of the KSDK wdog driver.In this example,quick test is first implemented to test the wdog.And then after 5 times of refreshing the watchdog, a timeout reset is generated.