The dspi_edma_b2b_transfer example shows how to use DSPI CMSIS driver in edma way:In this example , we need two boards, one board used as DSPI master and another board used as DSPI slave.The file 'dspi_edma_b2b_transfer_slave.c' includes the DSPI slave code.1. DSPI master send/received data to/from DSPI slave in edma .

The dspi_int_b2b_transfer example shows how to use DSPI CMSIS driver in interrupt way:In this example , we need two boards, one board used as DSPI master and another board used as DSPI slave.The file 'dspi_int_b2b_transfer_master.c' includes the DSPI master code.This example uses the transactional API in DSPI driver.1. DSPI master send/received data to/from DSPI slave in interrupt .

The dspi_int_b2b_transfer example shows how to use DSPI CMSIS driver in interrupt way:In this example , we need two boards, one board used as DSPI master and another board used as DSPI slave.The file 'dspi_int_b2b_transfer_slave.c' includes the DSPI slave code.This example uses the transactional API in DSPI driver.1. DSPI master send/received data to/from DSPI slave in interrupt .

CMSIS-Driver defines generic peripheral driver interfaces for middleware making it reusable across a wide range of supported microcontroller devices. The API connects microcontroller peripherals with middleware that implements for example communication stacks, file systems, or graphic user interfaces. More information and usage methord please refer to http://www.keil.com/pack/doc/cmsis/Driver/html/index.html.The cmsis_i2c_read_accel_value example shows how to use CMSIS I2C driver to communicate with an i2c device: 1. How to use the i2c driver to read a i2c device who_am_I register. 2. How to use the i2c driver to write/read the device registers.In this example, the values of three-axis accelerometer print to the serial terminal on PC throughthe virtual serial port on board.

CMSIS-Driver defines generic peripheral driver interfaces for middleware making it reusable across a wide range of supported microcontroller devices. The API connects microcontroller peripherals with middleware that implements for example communication stacks, file systems, or graphic user interfaces. More information and usage methord please refer to http://www.keil.com/pack/doc/cmsis/Driver/html/index.html.The cmsis_uart_edma_transfer example shows how to use uart cmsis driver with EDMA:In this example, one uart instance connect to PC through uart, the board willsend back all characters that PC send to the board.Note: The example echo every 8 characters, so input 8 characters every time.

CMSIS-Driver defines generic peripheral driver interfaces for middleware making it reusable across a wide range of supported microcontroller devices. The API connects microcontroller peripherals with middleware that implements for example communication stacks, file systems, or graphic user interfaces. More information and usage methord please refer to http://www.keil.com/pack/doc/cmsis/Driver/html/index.html.The cmsis_uart_interrupt_transfer example shows how to use uart cmsis driver in interrupt way:In this example, one uart instance connect to PC through uart, the board willsend back all characters that PC send to the board.Note: The example echo every 8 characters, so input 8 characters every time.

The CRC Example project is a demonstration program that uses the KSDK software to generate checksumsfor an ASCII string. Several CRC protocols are implemented using the CRC driver API.

The DAC / ADC demo application demonstrates the use of the DAC and ADC peripherals. This application demonstrates how toconfigure the DAC and set the output on the DAC. This demo also demonstrates how to configure the ADC in 'Blocking Mode'and how to read ADC values.

The dac_basic example shows how to use DAC module simply as the general DAC converter.When the DAC's buffer feature is not enabled, the first item of the buffer is used as the DAC output data register.The converter would always output the value of the first item. In this example, it gets the value from terminal,outputs the DAC output voltage through DAC output pin.

The dac_buffer_interrupt example shows how to use DAC buffer with interrupts.When the DAC's buffer feature is enabled, user can benefit from the automation of updating DAC output by hardware/software trigger. As we know, the DAC converter outputs the value of item pointed by current read pointer. Once the buffer is triggered by software or hardware, the buffer's read pointer would move automatically as the work mode is set,like normal (cycle) mode, swing mode, one-time-scan mode or FIFO mode.In this example, it captures the user's type-in operation from terminal and does the software trigger to the buffer.The terminal would also display the log that shows the current buffer pointer's position with buffer events.