The spi_interrupt_b2b_master example shows how to use spi functional API to do interrupt transfer as a master:In this example, the spi instance as master. Master sends a piece of data to slave, receive data from slave,and checkif the data master received is correct. This example needs to work with spi_interrupt_b2b_slave example.

The spi_interrupt_b2b_slave example shows how to use spi functional API to do interrupt transfer as a slave:In this example, the spi instance as slave. Slave receives data froma master and send a peiece of data to master,and check if the data slave received is correct. This example needs to work with spi_interrupt_b2b_master example.

The spi_interrupt_board2board_master example shows how to use spi driver as master to do board to board transfer withinterrupt:In this example, one spi instance as master and another spi instance on othereboard as slave. Master sends a piece ofdata to slave, and receive a piece of data from slave. This example checks if the data received from slave is correct.

The spi_interrupt_board2board_slave example shows how to use spi driver as slave to do board to board transfer with interrupt:In this example, one spi instance as slave and another spi instance on other board as master. Master sends a piece ofdata to slave, and receive a piece of data from slave. This example checks if the data received from master is correct.

The spi_polling_board2board_master example shows how to use spi driver as master to do board to board transfer with polling:In this example, one spi instance as master and another spi instance on othereboard as slave. Master sends a piece ofdata to slave, and receive a piece of data from slave. This example checks if the data received from slave is correct.

The spi_polling_board2board_slave example shows how to use spi driver as slave to do board to board transfer withpolling:Notice: The SPI slave of this example uses interrupt mode, as there is no polling mode for SPI slave.In this example, one spi instance as slave and another spi instance on other board as master. Master sends a piece ofdata to slave, and receive a piece of data from slave. This example checks if the data received from master is correct.

The TPM project is a demonstration program of the SDK TPM driver's input capture feature.The example sets up a TPM channel for dual-edge capture. Once the input signal is received,this example will print the capture value.

The TPM project is a demonstration program of the SDK TPM driver's output compare feature.It sets up one TPM channel to toggle the output when a match occurs with the channel value. The usershould probe the TPM output with a oscilloscope to see the signal toggling.

The TPM project is a simple demonstration program of the SDK TPM driver. It sets up the TPMhardware block to output PWM signals on two TPM channels. The PWM dutycycle on both channelsis manually updated. On boards that have an LED connected to the TPM pins, the user will seea change in LED brightness if user enter different values.

The TPM project is a simple demonstration program of the SDK TPM driver. It sets up the TPMhardware block to output a center-aligned PWM signal. The PWM dutycycle is manually updated.On boards that have an LED connected to the TPM pins, the user will see a change in LEDbrightness if user enter different values.