The lpi2c_edma_b2b_transfer_master example shows how to use lpi2c driver as master to do board to board transfer with EDMA:In this example, one lpi2c instance as master and another lpi2c instance on the other board as slave. Master sends a piece of data to slave, and receive a piece of data from slave. This example checks if the data received from slave is correct.

The lpi2c_edma_b2b_transfer_slave example shows how to use lpi2c driver as slave to do board to board transfer with a EDMA master:In this example, one lpi2c instance as slave and another lpi2c instance on the other board as master. Master sends a piece of data to slave, and receive a piece of data from slave. This example checks if the data received from slave is correct.

The lpi2c_functional_interrupt example shows how to use lpi2c functional driver to build a interrupt based application:In this example , one lpi2c instance used as lpi2c master and another lpi2c instance used as lpi2c slave .1. lpi2c master send data using interrupt to lpi2c slave in interrupt .2. lpi2c master read data using interrupt from lpi2c slave in interrupt .3. The example assumes that the connection is OK between master and slave, so there's NO error handling code.

The lpi2c_interrupt_b2b_transfer_master example shows how to use lpi2c driver as master to do board to board transfer with interrupt:In this example, one lpi2c instance as master and another lpi2c instance on the other board as slave. Master sends a piece of data to slave, and receive a piece of data from slave. This example checks if the data received from slave is correct.

The lpi2c_interrupt_b2b_transfer_slave example shows how to use lpi2c driver as slave to do board to board transfer with interrupt:In this example, one lpi2c instance as slave and another lpi2c instance on the other board as master. Master sends a piece of data to slave, and receive a piece of data from slave. This example checks if the data received from slave is correct.

The lpi2c_polling_b2b_transfer_master example shows how to use lpi2c driver as master to do board to board transfer using polling method:In this example, one lpi2c instance as master and another lpi2c instance on the other board as slave. Master sends a piece of data to slave, and receive a piece of data from slave. This example checks if the data received from slave is correct.

The lpi2c_polling_b2b_transfer_slave example shows how to use lpi2c driver as slave to do board to board transfer with a polling master:In this example, one lpi2c instance as slave and another lpi2c instance on the other board as master. Master sends a piece of data to slave, and receive a piece of data from slave. This example checks if the data received from slave is correct.

The lpi2c_read_accel_value example shows how to use LPI2C driver to communicate with an lpi2c device: 1. How to use the lpi2c driver to read a lpi2c device who_am_I register. 2. How to use the lpi2c driver to write/read the device registers.In this example, the values of three-axis accelerometer print to the serial terminal on PC throughthe virtual serial port on board.

The LPIT project is a simple example of the SDK LPIT driver. It sets up the LPIThardware block to trigger a periodic interrupt after every 1 second. When the LPIT interrupt is triggereda message a printed on the serial terminal and an LED is toggled on the board.

The lpspi_edma_b2b_transfer example shows how to use LPSPI driver in edma way:In this example , we need two boards, one board used as LPSPI master and another board used as LPSPI slave.The file 'lpspi_edma_b2b_transfer_master.c' includes the LPSPI master code.1. LPSPI master send/received data to/from LPSPI slave in edma . (LPSPI Slave using edma to receive/send the data)