Development Kit E7 Gen 2 (FBGA194)

• Debug Interfaces
  JTAG/SW	20-pin Arm Coresight JTAG Connector (1.27 mm)
  JTAG/SW	10-pin Arm Coresight JTAG Connector (1.27 mm)

• Other
  Crystal Oscillator	38.4 MHz Crystal Oscillator

• Power
  Power Supply	4.75 V - 5.25 V Power Supply
  Power Socket	1 x 2.1-mm DC barrel Jack, center positive
  Battery	1 x CR2032 Battery for RTC and VBATT peripherals
  Current	600 mA (typ), 1000 mA (max) Current

• Memory
  RAM	1 x 32MB Octal SPI HyperRAM PSRAM
  Flash	1 x 32MB Octal SPI Flash
  SD/microSD/MMC Card Holder	2 x Micro SD Card Holder

• I/O
  Digital I/Os	30 x Digital IOs on 2 x 20 pin header (2.54 mm pitch)
  Digital I/Os	32 x Digital IOs on 2 x 20 pin header (2.54 mm pitch) 1.8V/3.3V/5.0V
  Digital I/Os	32 x Digital IOs on 2 x 20 pin header (2.54 mm pitch) for Parallel Camera or Display
  Digital I/Os	12 x IOs for Click Module on 2 x 8 pin header (2.54 mm pitch)
  Analog I/Os	32 x 24 x Analog IOs and 8 x Digital IOs on 2 x 20 pin header (2.54 mm pitch)

• Connectors
  USB	1 x High-Speed USB Device, Micro-AB receptacle
  USB	1 x High-Speed USB Device, Micro-AB receptacle, PGM and UART interface via onboard USB-to-UART bridge
  USB	1 x High-Speed USB Host, Type-A receptacle
  Ethernet	1 x 100 Mbit/s RJ-45 receptacle, 10/100 Ethernet

• Sensors
  Accelerometer	1 x 3-axis Digital Accelerometer in ICM-42670-P
  Gyroscope	1 x 3-axis Digital Gyroscope in ICM-42670-P
  Accelerometer	1 x 3-axis Digital Accelerometer in BMI323
  Gyroscope	1 x 3-axis Digital Gyroscope in BMI323
  Temperature Sensor	1 x 16-bit Digital Temperature Sensor in BMI323
  Other Sensor	2 x I2S Digital MICs
  Other Sensor	2 x PDM Digital MICs

• Controls
  Joystick	1 x 5-position Joystick
  Push-buttons	1 Reset Push-button

• Display
  LEDs	2 x Multicolor LEDs
  GLCD	480 x 800 4.3-inch Color TFT LCD with Capacitive Touchscreen

• Camera
  Camera	1 x 2-Lane MIPI CSI Connector for OnSemi ARX3A0 0.3MP 1/10.3 MONO